Full Automatic Non Woven Fabric Machinery For Large Scale Non Woven Fabrics

Description:

Equipment can be slitting rewinding spunlace cloth, wood pulp cloth, non-woven, meltblown, Jakob, spunbond nonwovens and, product cutting neat without burr, the machine for processing with or without mandrel, equipment volume, light box cloth inspection, cutting, counting, winding at the same time, according to customer production require the replacement of various plant configurations. For details, please contact us.

Specification:

Features:

1 Equipment, light box inspection cloth, cutting, counting, winding at the same time.

2 Machine door width 3500 mm, the maximum diameter of 1200 mm.

3 The original cloth is placed in a single cylinder synchronous conveying system, gas - up - shaft, put the roll diameter 350mm and the use of the electroplating light roll.

In the machine speed can be adjusted to 150 m / min (specific according to the characteristic of constant speed), the normal production speed at 60-100 meters / min.

5. Coiling device with the whole exhaust pressure adjusting device, both ends of the linear slide up and down movement, tooth row of parallel positioning coiling roller, gas expansion shaft winding, coiling drum diameter 350mm (which 1 root with wear-resistant roller, 1 piece of plating and).

6 The cutting width can be adjusted in a certain range, the maximum diameter of the product is 1200 mm (1200mm) can be adjusted.

7. The equipment is equipped with 13 high precision aluminum alloy Phytosome and, with blast discharge waste device, stepless speed regulation, slitting and rewinding speed, counting, online cutting air knife 5 sets.

8 Equipment used in the production of Taiwan shear type pneumatic knife, left and right to adjust, adjust the cutting width is convenient and flexible.

9 Machine equipped with a cylinder 6, the whole machine frame are made of 40mm thick steel, which put the roll stand about 1500mm x high 2000mm; check cloth aisle width of about 1500mm, the volume is about 1500mm x high 2000mm.

10 Machine power 13.5KW, electrical uses PLC and touch screen (10 inches), servo system control, which unwinding servo by 5.5kW, winding servo use 7.5kW, servo motor by Taiwan "Xinjie" brand, touch screen with Taiwan "Willen" brand, electrical parts wiring specification is reasonable, safe, clean and easy to operate.

11 Tension control with 100 kg servo tension sensor, and the coil servo equipped with worm gear worm gear box.

12. Machine wall is fixedly connected with the formed steel, surface and antirust processing, all machine bedplate must do antirust paint processing, frame welding is accurate in size, stent of appropriate reinforcement, and all transmission part adopt synchronous belt transmission to ensure stable operation of the machine.

The main components of the 13 standard parts are made of high quality 45# steel and inner six angle screw, and stainless steel material is used for the health effects of products.

The company also provides a variety of rolling, rolling, magnetic powder, magnetic powder, the control of the rolling force control, conveyor belt control, servo control and other methods, in order to meet the requirements of various products, to achieve the best effect.

At present the same industry, the same equipment in the production of quality or technical indicators are not comparable with our factory.